PRO2™ HDOT® 14.4kW - 17.3kW 3-Ph (36-42) outlets Rack PDU

The PRO2 hot-swappable network card provides for HTTP(S), SSH, Telnet,SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more.

Network access is ensured when power is lost to the Master unit with backup power provided by the primary link unit.

PRO2 provides the ability to link up to four power circuits using one IP address. Primary link provides backup power to network card.

PRO2 Master and Link units each support two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications.

Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in high-density cabinets.

Meets ANSI C12.1 for billing-grade accuracy of Current per phase. PIPS includes voltage, active power, apparent power, power factor, and energy.

PRO2 monitors current at each breaker branch and provides SNMP-based alerts and emails on high usage that risks a tripped circuit.

PRO2 meets the UL and IEC 60950-1 requirement for branch circuit protection through use of UL489 rated magnetic-hydraulic circuit breakers or UL248 fuses.

3-phase power is wired in an alternating fashion per outlet for simplified load balancing, reduced cord lengths, and better airflow.

The highest outlet density available in a network connected PDU. Meets IEC C13 and C19 specifications, plus high native retention and UL94V-0 flame rating.

PRO2 receptacles have high retention and are compatible with P-Lock type power cords.

This product has been tested and approved for safe and reliable operation in 60°C (140°F) data center environments.

PRO2 includes standard button mounts along with provisions for custom mounting brackets (contact Server Technology for details).

Choose from six colors to designate circuits for rack PDUs in the data center. Color options include Blue, Red, Green, White, Yellow, and Black.

PRO2 meets the requirements set forth by Cisco Systems, Inc. for its EnergyWise program for monitoring of device energy. EnergyWise is a registered trademark of Cisco Systems, Inc.

The Server Technology® PRO2 Smart/Switched POPS PDU provides control of outlet power(Switched only) and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® and POPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input and at each output (POPS only). These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Smart/Switched POPS “Master" PDU can be connected to as many as three (with optional module) PRO2 Smart/Switched POPS “Link" PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.

Branch Monitoring:Current (A)

Branch Overcurrent Protection:10 kAIC

Branch Overcurrent Protection Type:Circuit Breaker: 2-pole

Dual Input:No

High Retention Outlets:Yes

Input Current Display:Auto-Orient

Input Monitoring:PIPS

Locking Outlets:Yes

Max Operating Temperature:60 °C

Fast Movers:No

Mounting:0U Vertical

Outlet Monitoring:Determined By Outlet Module

PDU Platform:pro2

Power Pivot Input:No

Product Height (inch):70.0

Product Height (mm):1778

Product Max Depth (inch):3.0

Product Max Depth (mm):77

Product Nominal Depth (inch):2.5

Product Nominal Depth (mm):64

Product Width (inch):2.2

Product Width (mm):56